BASIS TWIN CURE is a denture base resin material applicable for both Heat Shock and Microwave-Curing methods.
An adaptable, aesthetically pleasing and void -free denture is achievable without any air bubble formation or shrinkage in a less working time.

Heat Shock-Curing Method: Immerse the flask in boiling water for 15 minutes.
Cool the flask for about 30 minutes at room temperature.
Recover denture after cooling completely.

Microwave-Curing Method: Put the flask* into the microwave machine at 500W and cure for 3 minutes.
In case where metal wire (clasp, etc.) is used, invest plaster and put water (about 180 mL) on the side of flask and then apply the microwave.
Recover denture aftercooling completely.
*Use SS FRP microwave-curing flask.
Using conventional denture base resin, formation of void spaces translate into denture porosity thus prone to fractures, cracks and deformations.
BASIS TWIN CURE eliminates void spaces formation that causes denture mechanical failures.

Packing	Retail
Powder	1 kg
Liquid	500 mL (Pipette x 1) 17 L
Shades
	All shades are vein fibers-containing shades.

Physical Properties